4-Way Flow Ceiling Suspended Type

This slim and stylish indoor unit achieves optimum air distribution, and can be installed without the need for ceiling cavity.

  • Compact design
  • Individual airflow direction control
  • Adapts easily to the installation space
  • Drain pump is equipped as a standard accessory.
Download Catalogue

Where to buyWhere to buy


Energy Saving

Energy efficiency has been improved thanks to the adoption of a heat exchanger with smaller tubes, DC fan motor and DC drain pump motor.

Individual Airflow Direction Control

With adoption of the individual flap control, airflow direction adjustment can be individually set for each air outlet. 5 directions of airflow and auto-swing can be selected with wired remote controller BRC1E62, which realizes the optimum air distribution.

Compact Design

  • Unit body and suction panel adopted round shapes and realized a slim appearance design. The unit can be used for various locations such as the ceilings with no cavity and bare ceilings.
  • Flaps close automatically when the unit stops, which gives a simple appearance.
  • Unified slim height of 198 mm for all models that gives the unified impression even when models with different capacities are installed in the same area.

Flexible Installation

  • Depending on installation site requirements or room conditions, 2-way, 3-way and 4-way discharge patterns are available.
  • Built-in electronic expansion valve eliminates the need for a BEV unit, which improves flexibility of installation.


Cooling Capacity kW 8.0 11.2
Btu/h 27,300 38,200
Heating Capacity kW 9.0 12.5
Power Consumption Cooling kW 0.090 0.200
Heating kW 0.073 0.179
Sound Level (H/M/L) dB(A) 40/38/36 47/44/40
Dimensions (H x W x D) mm 198 x 950 x 950
Note: Specifications are based on the following conditions;
  • Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
  • Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
  • Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)
  • Sound level:
    Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit center.
    During actual operation, these values are normally somewhat higher as a result of ambient conditions.


Please take a look at the table below for the detailed information
regarding the appropriate combinations of indoor units and outdoor units.

VRV Combination Table
Back to top