Ceiling Mounted Duct Type

Middle and high static pressure allows for flexible duct design.

  • Increasing design flexibility
  • Improved ease of installation
  • Improved ease of maintenance
  • Drain pump is equipped as standard accessory with 700mm lift.
Download Catalogue

Where to buyWhere to buy

Features

Increasing Design Flexibility

A DC fan motor increases the external static pressure capacity range to include middle to high static pressures, increasing design flexibility.

Quiet operation

Low operation sound level

Energy Efficient

The adopted DC fan motor is much more efficient than the conventional AC motor, yielding an approximate 20% decrease in energy consumption (FXMQ125P).

Improved Ease of Installation

Airflow rate can be controlled using a remote controller during test operation. With the conventional model, the airflow rate was controlled from the PC board. It is automatically adjusted to the range between approximately ±10% of the rated HH tap airflow for FXMQ20P-125P.

Improved Ease of Maintenance

The drain pan can be detached for easy cleaning. An antibacterial treatment that uses silver ions has been applied to the drain pan, preventing the growth of slime, mould and bacteria that cause blockages and odors.

Specifications

Model FXMQ20PVE FXMQ25PVE FXMQ32PVE FXMQ40PVE
Cooling Capacity kW 2.2 2.8 3.6 4.5
Btu/h 7,500 9,600 12,300 15,400
Heating Capacity kW 2.5 3.2 4 5
Power Consumption* Cooling kW 0.056 0.056 0.060 0.151
Heating kW 0.069 0.069 0.073 0.182
Sound Level (HH/H/L) dB(A) 33/31/29 33/31/29 34/32/30 39/37/35
Dimensions (H x W x D) mm 300 x 550 x 700 300 x 550 x 700 300 x 550 x 700 300 x 700 x 700
Model FXMQ50PVE FXMQ63PVE FXMQ80PVE FXMQ100PVE
Cooling Capacity kW 5.6 7.1 9.0 11.2
Btu/h 19,100 24,200 30,700 38,200
Heating Capacity kW 6.3 8.0 10.0 12.5
Power Consumption* Cooling kW 0.128 0.138 0.185 0.215
Heating kW 0.203 0.218 0.286 0.364
Sound Level (HH/H/L) dB(A) 41/39/37 42/40/38 43/41/39 43/41/39
Dimensions (H x W x D) mm 300 x 1,000 x 700 300 x 1,000 x 700 300 x 1,000 x 700 300 x 1,400 x 700
Model FXMQ125PVE FXMQ140PVE FXMQ200MAVE FXMQ250MAVE
Cooling Capacity kW 14.0 16.0 22.4 28.0
Btu/h 47,800 54,600 76,400 95,500
Heating Capacity kW 16.0 18.0 25.0 31.5
Power Consumption* Cooling kW 0.284 0.405 1.294 1.465
Heating kW 0.449 0.449 1.294 1.465
Sound Level (HH/H/L) dB(A) 44/42/40 46/45/43 48/45 48/45
Dimensions (H x W x D) mm 300 x 1,400 x 700 300 x 1,400 x 700 470 x 1,380 x 1,100 470 x 1,380 x 1,100
Note: Specifications are based on the following conditions;
  • Cooling: Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB,Equivalent piping length: 7.5 m, Level difference: 0 m.
  • Heating: Indoor temp.: 20°CDB, Outdoor temp.: 7°CDB, 6°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
  • Capacity of indoor unit is only for reference. Actual capacity of indoor unit is based on the total capacity index. (See Engineering Data Book for details.)
  • Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit center. During actual operation, these values are normally somewhat higher as a result of ambient conditions.
* Power consumption values are based on conditions of rated external static pressure.
Back to top